With time you will always find out that your concrete driveways are developing cracks. The major causes of this being the results of weather and wear and tear due to driving on it. In the previous days, when the surfaces had cracks, the only way people opted for repairing was ripping it and pouring new covers. But in the current, this is no longer necessary as you can fill the cracks and resurface the driveway with much ease.
What will you do when your driveways are becoming much populated with cracks and pits of all sizes? The best way is having them fixed is just by applying sealed concrete when your concretes are not cracking all way. You can use a concrete resurfacer in coating the slabs which are blends of polymer additives, sand, and salt which will aid in filling the holes, making the surfaces looking more uniform.
Thus below are some of the guidelines that can aid you in sealed concrete your concrete driveway:
- Cleaning the area
Before you apply the sealed concrete, you need to strip your driveways of any paints and sealings. It is imperative also looking at the temperatures as you need to ensure that you are working when they are ideally above fifty degrees for at least eight hours, and the temperatures need to be at least twenty degrees for the next twenty-four hours. This is the reason that makes sealed concrete best carried in the summer season. It is also necessary to ensure that you can carry out the sealed concrete within a day.
- Blast the dirt off the surface
You should then blast off the driveways with high-pressure water at 3500 psi. This will help in removing the trash, mildews, and algae from the surfaces. During the process, it is necessary to put on protective clothing’s before you start the blasting process. More so, you can rent gas powered washers for doing this task. You can then fit twenty-five degrees tip then hold it a bit far from the driveways.
- Mixing up the resurface
This I usually an essential part during sealed concrete application on your concrete driveways. While your pavement is still wet, you can then mix up the required quantity sealers, and then you can mix one part of the water with about seven parts of the resurfacers in the buckets. You can then paddle mixers that are attached to a drill mixing it. After that, you can then fill all the recesses with the resurfacers while smoothing it with trowels.
- You are filling your driveways.
After mixing the sealed concrete materials, then the need to filling the driveways sets in. You can use the stick foam and peels while dampening the concretes when it has already dried. Since the concrete resurfacer needs very little time to be applied, you will have to pour the mixture on your driveways within the shortest time possible. You can then start spreading the sealed concrete to the point it gets a bit thicker. After that you can wait for some time before you can sweep the thick nylon .once you are done you can wait for about six hours before using the driveways.
When you have high-quality overlays that are installed by contractors with experience, this helps in providing decorative touches that will be lasting for decades. But in the case you need to gain long-term performances, then preserving the resurfaced concrete driveways with suitable quality sealers is necessary. A sealer may provide additional benefits such as blocking the penetration of stains, enriching the quality of the surface, improving water repellent abilities and abrasion resistance
Sealed concrete is an excellent option in restoring and beautifying the existing concretes. Your task is to determine the textures, patterns, and colors you are wishing your rejuvenated surfaces to have and then hire the services of sealed concrete contractors in your area. Companies like “Treasure Coast Concrete Services Pros” will provide you with high-quality sealed concrete services and at the same time ensure that your driveway is gaining that look that is appealing.